PE 8300-3-01 3A Power Entry Module EMI EMC Filter with Fuses and On / Off Switch
Quick Details:
| Product Name | IEC Inlet Filter |
| Model | PE8300-3-01 |
| Rated Voltage | 120/250VAC |
| Rated Current | 1A~10A |
| Operating Frequency | 50/60Hz |
| Temperature range | HPF 25/085/21 |
| Test Voltage(1 min) | Line to Ground :2000VAC |
| Line to Line :1450VDC |
Description:
EMI MEC filter, also known as electromagnetic interference filter, network filter, network noise filter and so on, or collectively known as EMI filter.The power supply EMI filter is a low-pass filter, which transmits the dc power, 50Hz or 400Hz power to the equipment without attenuation, greatly attenuating the incoming EMI signal through the power supply, and protecting the equipment from its harm.At the same time, EMI signals generated by the equipment can be effectively controlled to prevent it from entering the power grid, polluting the electromagnetic environment and harming other equipment.EMI filter of power supply is an indispensable component to help electromagnetic equipment and systems meet electromagnetic compatibility standards, such as IEC, FCC, VDE, mil-std-461, GB9254 and GB6833.PE8300 / PE8400 power entry module combines an IEC inlet, a mains filter with single or dualfuse holder and a 2-pole rocker switch in a small form factor. It is rated currents from 1A to 10A. High conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior.
Specifications:
1.Outline Drawing and Dimensions:
All dimensions in mm; 1 inch=25.4mm
 |
2. Electrical Schematic:
3.Filter Selection Table:
| Filter | Rated Current(A) | Rated Voltage(V) | Leakage Current(mA) | Input/Output Connections |
| PE8300-1-01 | 1 | 120/250 | 0.5 | 01 |
| PE8300-3-01 | 3 | 120/250 | 0.5 | 01 |
| PE8300-6-01 | 6 | 120/250 | 0.5 | 01 |
| PE8300-10-01 | 10 | 120/250 | 0.5 | 01 |
| PE8400-1-01 | 1 | 120/250 | 0.5 | 01 |
| PE8400-3-01 | 3 | 120/250 | 0.5 | 01 |
| PE8400-6-01 | 6 | 120/250 | 0.5 | 01 |
| PE82400-10-01 | 10 | 120/250 | 0.5 | 01 |
4. Insertion Loss in dB
5. EMI EMC Filter Packaging:
Packaging Details
1. Inner: blow moulding plate
2. Outer: strong A-A 5 layer carton packing with shock absorbing PE foam filling to protect the EMI/EMC filter
3. Customized packaging acceptable
Port: Shenzhen,China
Application:
1. Single-phase power supplies,switch-mode power supplies
2.Test and measurement equipment
3. Portable electrical and electronic equipment
4. EDP and office equipment
5. Medical equipment
6. Consumer goods
Competitive Advantages:
1. Mains filter with single or dualfuse holder and a 2-pole rocker switch in a small form factor.
2. Rated currents up to 10A.
3. Rear/front or snap-in mouting.
4. Optional medical version(B type)
5. Snap-in versions(S type)
6. Custom-specific versions are available on request
Tag:
Power supply EMI filter, EMI Power line filter, Power line filter, Noise power line filter, Rejector, Electromagnetic interference filter,
Network filter, Network noise filter
Product Tags:
|
|
Lightweight AC Power Line Noise Filter Snap In Versions With On / Off Switch Images
|
